The engine sensor is a critical component used to monitor various parameters of an engine. By tracking metrics such as temperature, pressure, and RPM, this sensor provides valuable data for optimizing engine performance, detecting issues, and ensuring proper operation.
Configure Parameters:
- Temperature:
- Requirement: Optional
- Description: Measures the thermal state of the engine, typically in degrees Celsius (°C) or Fahrenheit (°F).
- Field Type: Select Protocol
- Oil Pressure:
- Requirement: Optional
- Description: Indicates the force exerted by engine oil within the lubrication system, crucial for preventing engine damage.
- Field Type: Select Protocol
- Fuel Pressure:
- Requirement: Optional
- Description: Monitors the force exerted by fuel within the system, essential for engine performance.
- Field Type: Select Protocol
- RPM (Revolutions Per Minute):
- Requirement: Optional
- Description: Measures the engine speed in revolutions per minute.
- Field Type: Select Protocol
- Vibration:
- Requirement: Optional
- Description: Detects oscillatory motion to monitor performance and assess structural health.
- Field Type: Select Protocol
- Fluid Level %:
- Requirement: Optional
- Description: Indicates the current level of a fluid in a container as a percentage of total capacity.
- Field Type: Select Protocol
- Emission Level:
- Requirement: Optional
- Description: Measures the quantity of pollutants or greenhouse gases released by the engine.
- Field Type: Select Protocol
- Voltage:
- Requirement: Optional
- Description: Monitors the electrical potential difference in volts (V) within the engine's electrical system.
- Field Type: Select Protocol
- Humidity:
- Requirement: Optional
- Description: Indicates the moisture level in the air within the engine environment.
- Field Type: Select Protocol
- Status:
- Requirement: Mandatory
- Description: Reflects the current operational state of the engine.
- Field Type: Select Protocol
- Torque:
- Requirement: Optional
- Description: Measures the rotational force applied within the engine, often expressed in Newton-meters (Nm) or pound-feet (lb-ft).
- Field Type: Select Protocol