Devices can be connected to the polygon using different protocols depending on the device manufacturer. Each protocol ensures proper communication and management between devices and the polygon system. This guide explains the protocols used by various device types and how they integrate into the polygon system.
Concox devices communicate using their proprietary protocol, ensuring reliable data transmission. For official details:
- Concox GPS Tracking Solutions
- Configure the device to use the Concox Protocol.
- Ensure the correct communication port is set for data transmission.
- Verify connectivity by checking device logs.
Navitel devices support various protocols, but for polygon connectivity, the Navitel Protocol is recommended. Find more information here:
- Navitel Support
- Set up the device using the Navitel Protocol.
- Confirm that the device is sending data to the correct polygon system endpoint.
Queclink devices are widely used for their flexible protocol options. To connect them to the polygon:
- Queclink Official Documentation
- Use the Queclink Protocol.
- Input the appropriate IP address and port for the polygon system.
- Verify the connection status and device activity.
Ruptela devices operate with their own Ruptela Protocol, designed for real-time tracking and monitoring. More information is available here:
- Ruptela Protocol Documentation
- Configure the device with the Ruptela Protocol.
- Ensure correct device parameters are set to communicate with the polygon system.
- Test device functionality by monitoring transmitted data.
Teltonika devices use the Teltonika Protocol, a well-known standard for GPS tracking. For official information:
- Teltonika Protocol Documentation
- Set up the device using the Teltonika Protocol for polygon connectivity.
- Adjust communication settings to ensure smooth data transfer.
- Verify the integration by reviewing device logs.
The Wailon-IPS11 Protocol is a specialized protocol for connecting devices to the polygon. Official protocol details can be found here:
- Wailon Protocol Documentation
- Ensure the device is configured to use Wailon-IPS11.
- Confirm that all required parameters for IP and port are correctly set.
- Check device logs to confirm data is being sent and received correctly.
- Identify the device you wish to connect (e.g., Concox, Navitel, etc.).
- Configure the device to use its respective protocol.
- Set the device to transmit data to the polygon system by entering the correct IP and port.
- Validate the connection by checking device logs or monitoring its status in the system.
If a device fails to connect:
- Double-check the protocol settings.
- Verify that the communication port and IP address match the polygon system’s requirements.
- Ensure that the device is powered on and within network range.
- Consult the device's manual for additional troubleshooting steps.